poLight supplies its TLens to Suzhou Linkhou Robot, a solid-state tunable optic that changes focus electronically for autofocus. Linkhou integrated that optic into two new 2.3-megapixel camera modules for humanoid robots and embodied AI systems. poLight describes the LH-SL-2.3M-6PXX as an all-in-one camera using TLens piezoelectric MEMS autofocus, according to the poLight collaboration announcement. The second module offers the same focusing technology in a split-type layout for distributed integration.
Table of Contents
- What are the two camera modules?
- How does TLens focusing work?
- Why does stable focus matter for humanoid robots?
- How should designers apply the modules?
What are the two camera modules?
Both modules provide 2.3-megapixel imaging with TLens autofocus for robotic vision. poLight identifies the LH-SL-2.3M-6PXX as the all-in-one version. The Capital.com mirror of the Business Wire release identifies the LH-MIPI-2.3M-6PXX as the split-type modular version, according to the Capital.com mirror of the announcement.
The all-in-one package keeps optics, sensor, and focus control together. The split-type design separates the camera head from supporting electronics for tight cavities. That choice lets engineers match module shape to headroom, cable routing, and service access.
- LH-SL-2.3M-6PXX: all-in-one module for single-unit mounting
- LH-MIPI-2.3M-6PXX: split-type module for distributed mounting
- Shared basis: 2.3M resolution with TLens solid-state autofocus
How does TLens focusing work?
TLens changes optical power electronically through piezoelectric actuation. It uses no conventional focus motor or moving lens barrel. poLight says the design enables fast, precise focusing without conventional autofocus limitations, according to the poLight release via MFN.
poLight says the solid-state approach gives very fast focus response. It also reduces size, power consumption, and sensitivity to shock and vibration. Those traits matter when cameras ride on walking, rolling, or arm-mounted platforms.
Why does stable focus matter for humanoid robots?
Photonics Media reports the modules serve Linkhou customers building humanoid robots, embedded AI systems, and advanced robotic-vision applications that need stable autofocus during motion, according to the Photonics Media report. Focus must hold while the robot walks, turns, reaches, or carries a load.
Blur during those moves weakens detection, depth estimation, and grasp alignment. A focus mechanism sensitive to vibration forces repeated refocusing and missed frames. Solid-state actuation keeps the lens setting steady through routine mechanical disturbance.
How should designers apply the modules?
Robot designers can use the TLens-equipped Linkhou modules to hold focus with low power and constant field of view despite vibration, gravity, or thermal shifts. poLight's technology comparison presents constant field of view and tolerance to those shifts as practical advantages over voice-coil focusing. Specify the split-type head when the lens must fit inside an eye, hand, or slim mast while electronics sit elsewhere.
- Pick the all-in-one module when one rigid camera site is available.
- Pick the split-type module when optics and electronics must sit apart.
- Reserve power and thermal margin for continuous vision, not focus motors.
- Validate focus stability during walking, rotation, and payload handling.



